What are the different types of concrete wall finishes?

Exposed concrete finishes have resurfaced in popularity in 21st century architecture and interior design. Broom finish concrete is a trowel-finished concrete taken a step further. With this type of finish, the concrete surface is first leveled, and then “closed” with a trowel or a similar smoothing method. After this, workers drag a special broom across the surface.

Dragging creates a rougher texture than troweling alone. Not only does it look good, but it also provides more traction for areas that could slip when wet. Both trowel finish and broom finish require an aggregate of sand and rock. Exposed Aggregate Finish Reveals Aggregates Mixing Into Concrete.

The aggregates used for this finish are usually chosen for their appearance, unlike other finishes where they are not really seen. The finish of the exposed aggregate is achieved by washing the top layer of cement to allow the aggregate to be seen through. Aggregates can be attractive stones, seashells, colored glass, granite and other resistant materials. Concrete with exposed aggregate finish provides a safe, non-slip surface.

This makes it functional and attractive. Ideal for sidewalks, porches and corridors between buildings. Salt finish in concrete is often used around swimming pools or other wet areas. Applying rock salt to the surface of wet (uncured) concrete creates this finish.

Tinted concrete is a concrete to which color is added after it has been leveled and cured. Most concrete dyes are subtle or earthy colors, but there are many colors available. Stains take on ordinary concrete and give it depth and appeal. The grinding and polishing procedure creates the polished concrete surface.

Polished concrete surfaces are extremely durable and require little care. Polished concrete is constructed from existing building materials and helps improve the natural lighting of buildings by having high reflectivity, which saves energy by eliminating artificial lighting. For a pleasant appearance in the surrounding environment, the colored finish of the concrete is achieved through mixed pigments or post-cure staining. Pigment or strains can create a colored finish on a concrete surface.

Pigment-colored concrete can be made by mixing the pigments directly into the concrete mix before pouring them. Stains can be applied to concrete of any age for a more intense color finish, resulting in stressed colored concrete. The application of the dye is usually followed by the application of a sealant to protect the concrete surface. The polished concrete surface is created by the grinding and polishing process.

Polished concrete surfaces are exceptionally durable and require little maintenance. Polished concrete is made from recycled building materials. It has a high reflectivity, which helps improve natural lighting in buildings and saves energy by eliminating the need for artificial lighting. The aggregate finish mixed in the concrete is visible in an exposed aggregate finish.

The aggregates used in these finishing styles were chosen based on their appearance. We add to the exposed look by washing the top layer to make it stand out even more. Seashells, beautiful stones, granite, or colored glass can be used as aggregates. When it comes to offering a non-slip surface, exposed aggregate finishes are useful and attractive.

Smooth trowelling concrete is created when the cement mason uses a manual trowel or steel machine to close the exposed surface of the concrete project. Usually, concrete with slippery trowel can be found as garage floors, basement floors, warehouse floors, and covered front porches. More labor and time is required to produce the smooth trowel concrete finish, since the concrete must be hard enough for the cement finisher to walk, it kneel, ride or walk behind a mechanical finishing trowel machine. Broom finished concrete is similar to smooth trowel concrete, since both contain the same ingredients.

It is essential to preserve properly sealed pigmented concrete throughout its useful life to prevent water infiltration, which can cause the pigment to fade. The rest of the concrete is thin, since the retarding agent does not penetrate deeply and only affects the upper surface. Finishing is one of the most important parts of concrete after it has been cast, as it gives the concrete surface a nice look. Here are some of the most commonly used and truly effective concrete finishing techniques for its intended purpose.

The trowel method for finishing concrete is a great way to add something small to your concrete to make it stand out and unique to your home. To achieve the desired aesthetic, designs may include bricks, stones, or other decorative patterns, sometimes imitating other typical building materials, while preserving the strength and durability of concrete. Control joints are sawn into the surface of the concrete patio and then pressure washed to remove any additional mold release agent from the concrete surface before the concrete sealant can be applied after allowing it to dry. On fresh concrete surfaces, small stripes are made by pulling a broom according to the design so that friction remains under control.

When there are liquids on concrete surfaces without a broom finish, they become slippery and unsafe. The paste (cement and water) coats the aggregate (rock, sand) and, through hydration, the paste hardens, strengthens and creates concrete. Concrete finishers use trowels to smooth and refine, level the concrete surface after it has been tilled with a screed. Polished concrete finishes on a concrete surface are achieved through a mechanical grinding and polishing process with the use of specialized tools and equipment to provide distinct textures with the use of a penetrating chemical.

An acid dye for concrete floors has a very bold appearance, recognizable by its speckled appearance and its very varied finish. The concrete finishing work screed is used to level the concrete surface immediately after it has been laid in shape. . .

Leave Reply

Required fields are marked *