There are different types of concrete wall finishes that are used in structures are the following:. The concrete broom finish has a rough textured finish obtained by dragging a broom over the troweled surface of the concrete while the concrete is still fresh. The stamped concrete finish is obtained by pressing the required patterns onto the freshly leveled concrete. This type of concrete finish after the completion of its construction looks similar to stones such as slates or slabs, bricks, tiles, or, with proper skill, they can resemble wood.
Stamped concrete finishing is a very intelligent and innovative innovation in concrete widely applied for floors in patios, car porches, driveways and sidewalks. The saline-finished concrete surface is obtained by inserting coarse-grained rock salt crystals using rollers into the newly placed concrete surface and washing it with water jets after setting the concrete. The Power Floater or Diamond Polisher is used to polish the upper surface of partially cured concrete. The equipment removes a layer of concrete whose thickness does not exceed a few millimeters on top of the concrete.
A fine grade protective layer is applied to provide the preferred polished finish. The polished finish on a concrete surface is achieved by a mechanical grinding and polishing process with the aid of a penetrating chemical to provide a different texture with the aid of specialized tools and equipment. Concrete is a versatile material in its fresh state and can be finished in many types depending on the desired appearance, such as palette finish, broom finish, salt finish, exposed aggregate finish, polished finish, and color finish. Exposed concrete finishes have resurfaced in popularity in 21st century architecture and interior design.
Broom finish concrete is a trowel-finished concrete taken a step further. With this type of finish, the concrete surface is first leveled, and then “closed” with a trowel or a similar smoothing method. After this, workers drag a special broom across the surface. Dragging creates a rougher texture than troweling alone.
Not only does it look good, but it also provides more traction for areas that could slip when wet. Both trowel finish and broom finish require an aggregate of sand and rock. Exposed Aggregate Finish Reveals Aggregates Mixing Into Concrete. The aggregates used for this finish are usually chosen for their appearance, unlike other finishes where they are not really seen.
The finish of the exposed aggregate is achieved by washing the top layer of cement to allow the aggregate to be seen through. Aggregates can be attractive stones, seashells, colored glass, granite and other resistant materials. Concrete with exposed aggregate finish provides a safe, non-slip surface. This makes it functional and attractive.
Ideal for sidewalks, porches and corridors between buildings. Salt finish in concrete is often used around swimming pools or other wet areas. Applying rock salt to the surface of wet (uncured) concrete creates this finish. Tinted concrete is a concrete to which color is added after it has been leveled and cured.
Most concrete dyes are subtle or earthy colors, but there are many colors available. Stains take on ordinary concrete and give it depth and appeal. Ideal's versatile Microtopping product can be used to create matching, seamless floor and wall surfaces in new construction and renovations. With a nominal thickness of only 3 mm, it provides a “perfect, almost anonymous” background, according to Ideal Work.
This method is effective in withstanding any weather if good quality concrete is used in this method by means of waterproofing sealant. Finishing the concrete broom is done by finishing the rough texture by pulling the broom over the concrete surface. When it comes to concrete finishes, there are quite a few options that will look great and work well. On fresh concrete surfaces, small stripes are made by pulling a broom according to the design so that friction remains under control.
Commercial, residential and industrial projects are widely used in the design industry due to their attractive appearance and ease of texture of concrete in increasing technology. Concrete surfaces with a broom finish are used in places such as roads and bridge surfaces, sports field paths, etc. The shower is a curbless shower, which requires waterproofing the entire bathroom floor before applying the concrete finish. It provides an aesthetically pleasing appearance to the concrete surface, which is a favorite for outdoor applications because it not only adds beauty to the surface, but also provides safer walking and standing compared to the smooth surface finish, specifically during the wet season.
The construction of the exposed concrete finish consists of having the surface of the concrete floor level, distributing the aggregate evenly, and keeping air voids to a minimum. When the poured concrete has been flattened with a screed, you can work with a trowel to create a smooth and fine concrete surface. Cardone says the monolithic effect of this microcoating application on floors and walls produces a “simple, clean and elegant” look that focuses on other design elements: a darker, leather-clad wall gap in one area and wood paneling in another, and stone and concrete in other places. This product is a cementitious microcovering that can be applied with a trowel to coat interior concrete and terrazzo.
After placing the concrete in the formwork and leveling it, the trowel is used to smooth and finely level the concrete surface. . .
Leave Reply